Page 27
XX69RT Series - Service & Parts Manual
November 2022
Section 6 - Maintenance
Braking Distance, Maximum
High range on paved surface
3 ft 3 in
1 m
Note:
The brakes must be able to hold the machine on any slope it is able to climb.
D-5 Test the Drive Speed - Stowed Position
• Tools will be required to perform this procedure.
Proper drive functions are essential to safe machine operation. The drive function should respond
quickly and smoothly to operator control. Drive performance should also be free of hesitation, jerking
and unusual noise over the entire proportionally controlled speed range.
Perform this procedure with the machine on a firm, level surface that is free of obstructions.
1.
Create start and finish lines by marking two lines on the ground 40 ft (12.2 m) apart.
2. Turn the key switch to platform controls and Turn the ground red Emergency Stop button
clockwise to the on position. Pull out the platform red Emergency Stop button to the on position.
3. Start the engine from the platform controls.
4. Lower the platform to the stowed position.
5. Choose a point on the machine; i.e., contact patch of a tire, as a visual reference for use when
crossing the start and finish lines.
6. Bring the machine to maximum forward drive speed before reaching the start line. Begin timing
when your reference point on the machine crosses the start line.
7. Continue at full speed and note the time when your reference point on the machine passes over
the finish line. The time should be less than 8.8 sec.
D-6 Test the Drive Speed - Raised Position
• Tools will be required to perform this procedure.
Proper drive functions are essential to safe machine operation. The drive function should respond
quickly and smoothly to operator control. Drive performance should also be free of hesitation, jerking
and unusual noise over the entire proportionally controlled speed range.
Perform this procedure with the machine on a firm, level surface that is free of obstructions.
1.
Create start and finish lines by marking two lines on the ground 40 ft (12.2 m) apart.
2. Turn the key switch to platform controls and turn the ground red Emergency Stop button
clockwise to the on position. Pull out the platform red Emergency Stop button to the on position.
3. Start the engine from the platform controls.
4. Raise the platform approximately 8 ft (2.4 m) from the ground.
5. Choose a point on the machine; i.e., contact patch of a tire, as a visual reference for use when
crossing the start and finish lines.
6. Bring the machine to top drive speed before reaching the start line. Begin timing when your
reference point on the machine crosses the start line.
7. Continue at full speed and note the time when your reference point on the machine passes over
the finish line. The time should be 80 to 90 seconds.
Summary of Contents for 3369RT
Page 44: ...Page 39 XX69RT Series Service Parts Manual November 2022 Section 7 Schematics Notes ...
Page 180: ...Notes ...
Page 181: ...Notes ...