Page 9 Version 3
3. Carousel does not rotate.
Check the following:
(a)
The Carousel pusher arm is not jammed with broken clays or dirt.
(b)
The pusher return spring is broken or missing.
(c)
With the pusher arm withdrawn, the carousel should be free to rotate with a small
amount of friction. This is adjusted by tightening or loosening of the lock nut on top of
the carousels shaft.
(d)
Carousel pusher timing is in-correct, i.e. when the gearbox crank and connecting rod
are in line at maximum extension, the Rear Pusher nylon for the carousel should be deep
into the cut out on the Top Plate (100 e, 200e, 300e. 306xp). If your machine is a 400e or
408xp then the rear pusher will be on the radius of the top plate. If this is not the case,
then the clamp on the rear pusher shaft should be adjusted accordingly. It must be
tightened before operation of the machine.
https://www.youtube.com/watch?v=N3Wdk88efTQ
