M E A S U R E M E N T S Y S T E M S I N T E R N A T I O N A L
Page 6 MSI-5200C Bantam Vehicle Weighing System • User Guide
8)
The following additional procedure should be followed to gain
axle as well as total vehicle weights:
8a) Drive vehicle onto front two pads.
8b) Record weight.
8c) Continue forward and place all vehicle wheels onto pads and
record total.
8d) Subtract front axle weight (8b) from total weight (8c) to
obtain rear axle weight.
EXTERNAL A.C. OPERATION
The Bantam may be operated directly from 117 Volt +/- 10% 6OHz A.C.
external power sources.
1)
Turn the ON/OFF Switch to OFF.
2)
Connect cable 40035-6 to the connector on the side of the meter
labeled POWER.
CAUTION: Ensure proper pin alignment. Do not attempt to force
connector into place.
3)
Plug Cable 40035-6 into external A.C. power source.
4)
Operate system as in Battery Operation steps 1-8.
EXTERNAL D.C. OPERATION
The Bantam may be operated directly from 12 Volt D.C. external power
sources.
WARNING: Do not connect the Bantam to 28 Volt D.C. power sources.
1)
Turn the meter selector knob to OFF.
2)
Connect the battery clip ends of cable DS015 directly to a 12 Volt
battery in the following manner:
!
CAUTION
CAUTION
!
WARNING
WARNING
