background image

 

 

Declaration of Conformity 

Manufacturer: 

Measurement Computing Corporation 

Address: 

10 Commerce Way 

 

Suite 1008 

 

Norton, MA  02766 

 

USA 

Category: 

Electrical equipment for measurement, control and laboratory use. 

Measurement Computing Corporation declares under sole responsibility that the product 

 

USB-5201 

to which this declaration relates is in conformity with the relevant provisions of the following standards or other 
documents: 

EU EMC Directive 89/336/EEC: Electromagnetic Compatibility, EN 61326 (1997) Amendment 1 (1998) 

Emissions: Group 1, Class A 

 

EN 55011 (1990)/CISPR 11: Radiated and Conducted emissions.

 

Immunity:  EN61326, Annex A 

 

IEC 61000-4-2 (1995): Electrostatic Discharge immunity, Criteria C.

 

 

IEC 61000-4-3 (1995): Radiated Electromagnetic Field immunity Criteria A.

 

 

IEC 61000-4-8 (1994): Power Frequency Magnetic Field immunity Criteria A.

 

Declaration of Conformity based on tests conducted by Chomerics Test Services, Woburn, MA 01801, USA in 
February, 2006. Test records are outlined in Chomerics Test Report #EMI4445.06. 

We hereby declare that the equipment specified conforms to the above Directives and Standards. 

 

 

Carl Haapaoja, Director of Quality Assurance 

 

 

 

 

Summary of Contents for USB-5201































Reviews: