USB-1208FS-Plus User's Guide
Installing the USB-1208FS-Plus
8
Caution!
Do not disconnect any device from the USB bus while the computer is communicating with the
device, or you may lose data and/or your ability to communicate with the device.
If the LED turns off
If the LED is on but then turns off, the computer has lost communication with the device. To restore
communication, disconnect the USB cable from the computer and then reconnect it. This should restore
communication, and the LED should turn on.
Calibrating the hardware
The Measurement Computing Manufacturing Test department performs the initial factory calibration. Return
the device to Measurement Computing Corporation when calibration is required. The recommended calibration
interval is one year.
The USB-1208FS-Plus does not support field calibration.
