3
To enhance your batteries lifetime never let them discharge totally and do not store them for a long time if they are close of total
discharge.
If you plan to do not use your lamp for more than one week disconnect the batteries from the lamp. A good practice for storing
batteries while not using them is to keep them disconnected in a cool and dry place at approximately 50% of their charge capacity.
Our battery boxes are provided with two types of closing screws, one of them is filled with plastic head allowing you to opening the
box by hands. For caving and some underwater activities (such as cave diving) the screws with plastic heads shall not be used as
they could induce an opening of the battery box in case of shocks or contact with the rocks in narrow passages. For such activities
always use the naked stainless steel screws provided (or equivalent) and remind to bring an adapted tool with you if you need to
replace the battery.
Please ensure before closing the battery box that the connecting cables are properly positioned as per drawing n°1 thereafter. Never
close your battery boxes with an excessive force applied on the screws, it will risks to damage the sealing gasket as well as damage
the box threads and there decrease the water resistance.
For activities implying the need of having fully charged emergency batteries (as for example long caving explorations activity), we
suggest you to sometimes make your rescue batteries works, it will increase their lifetime.
If you plan to travel by plane with your lamp please ensure with your flight Company that Lithium-ion batteries are allowed on flight
and ask them where and how they should be stored during the flight.
Risk of explosion: We guarantee our Ansmann branded batteries only with the use of Ansmann chargers.
Drawing n°1: Illustration of proper positioning of cables and their connectors inside the battery box
Lamp mounting:
Our MEANDRE 1.0 is designed to be fixed by the means of two M5 stainless steel screws (as per drawings consigned later in the
document)
Depending on your will, we provide different types of mounting in order to fit with all possible activities. If you cannot find a mounting
solution for a special application, please contact us and we will try to propose you a solution.
Please note that for mounting your lamp on a helmet, depending on the type of helmet and mounting used, you may need to pierce
some small holes in your helmet. We under
line the fact that such modification will certainly invalid the warranty of the helmet’s
manufacturer and we cannot take any responsibility about potential consequences of these modifications on your helmet.
Depending on your helmet type we can provide m
ounting solutions fully compatible with helmets manufacturer’s warranty, for more
information regarding this topic please contact us and provide us the type of helmet you are planning to use.
