32
6.3.4.2 Setting of Clear Event Log/Data Log and Data Log Time Interval
6.3.4.3 Setting of Programmable Relay
6.3.4.4 PSU ON/OFF setting
The "Event Log" and "Data Log" buttons are used to clear the data that Event log/Data log has stored. The "Data
"Relay Setting" section is used to set activating conditions of the programmable relays. After setting, click the
"save" button to save your setting values.
Each relay can be set for the functions below :
Turning a unit or all the units on/off can be done by selecting the "scroll-down list". "ON(green)" indicates "PSU
ON", "OFF(red)" indicates "PSU OFF", and "N/A(orange)" indicates "unconnected". Once you have chosen a PSU,
you can click the "ON" or "OFF" buttons to turn it on/off. If the status column displays "N/A(orange)", it cannot be
controlled due to non-connection to the RKP-CMU1.
1.Alarm activating: Any Alarm, OVP, OLP, OTP, Short circuit, High Temp., AC Fail, Fan lock, or PMBus Error.
2.PSU ON activating: Immediately, or Delay (1~600 sec).
3.PSU OFF activating: Immediately, or Delay (1~600 sec).
4.Digital I/P activating: Control by DI1, control by DI2, control by DI3, or control by DI4.
Log interval" is used to set the time interval from 1 to 60 minutes.
Adjustable range (1~60)
