
17
Fig. 1C: PTO Deck Blades ON and OFF Switch
:
This switch engages the deck blade motors. Pull the switch
up to engage blades and push switch down to disengage blade motors.
IMPORTANT: ONLY engage Deck Blades when throttle lever is in the neutral position. NEVER engage blades
when moving!!!!
Fig. 1B: High & Low Blades Switch
–
(Located on top left mower control panel)
High Blade Mode is higher blade speed for cutting thicker grass. Low Blade Mode provides lower blade speed used for
lower battery consumption on thinner dry grass areas.
NOTE: Mowing time may be increased up to 15% when mowing in low blade mode
when practical.
Fig. 1A: Drive Speed Control Knob
–
Allows operator to select a comfortable walking speed via the Drive Speed Control Knob on the Mower Control
Panel. Turn knob clockwise to
INCREASE
drive speed and counterclockwise to
REDUCE
drive speed. Turn knob to
Lowest, Slow Speed for inexperienced operators, for trimming around objects, buildings and other obstacles.
Always EASY DOES IT when unsure or new user to the equipment! Get comfortable with mower before increasing knob
into faster speeds!
NOTE: Speed may be adjusted at any time whether mower is in motion or stopped.
OPERATION
Safe Operating Practices
This product is capable of amputating hands and feet and throwing objects. Always follow all safety instructions
to avoid serious injury or death.
Operation
Evaluate the terrain to determine what accessories and attachments are needed to properly and safely perform the
job. Only use accessories and attachments approved by the manufacturer. Clean battery compartment, drive motor
compartment, mower deck, seat etc. of all dirt and debris. Keep unit free of grass clippings, leaves and other debris.
DO NOT
spray with water to clean unit. Do not use, solvents, hard cleaners or abrasives. Use only compressed air.
Wear adequate eye and hearing protection when cleaning the unit.
Never leave a running machine unattended.
Always stop on level ground, disengage deck blade switch, place steering control levers in neutral position, turn key
to off position,
remove key and disconnect battery cables by pulling up on
LARGE RED
battery quick
disconnect
handle in battery box compartment for any reason including emptying the catcher or unclogging the chute. Always