7
•
Flashes twice when battery power is low.
B. BATTERY COMPARTMENT
•
Holds two AA-size batteries
C. RESET
•
Resets all previous settings
D. CHANNEL SWITCH
•
Selects the desired channel -1, 2 or 3
E. WALL-MOUNT RECESSED OPENING
•
Keeps the remote sensor on the wall
F. °C/ °F SWITCH
•
Selects the temperature display in Celsius or Fahrenheit
BEFORE YOU BEGIN
•
We recommend using alkaline batteries for the remote sensor and
main unit when temperatures are above 32°F (0°C). We recommend
using lithium batteries for the remote sensor when temperatures are
below 32°F (0°C).
•
Avoid using rechargeable batteries. (Rechargeable batteries cannot
maintain correct power requirements).
•
ALWAYS install batteries in the remote sensor before the main unit.
•
Insert batteries before first use, matching the polarity in the battery
compartment
•
Press RESET after each battery change with a paper clip or similar
tool.
•
Remove protective plastic screen from LCD display (if any).
•
During an initial setup, place the main unit close to the remote sensor.
•
After reception is established (the remote temperature will appear on
the main unit’s display), position the remote sensor and the main unit
