10
two seconds to initiate another signal search.
PLACEMENT OF THE UNITS
The main unit can be placed on the wall or any flat surface indoors.
The
remote sensor can be placed indoors or outdoors, on a flat surface or mounted
on the wall.
REMOTE AND INDOOR TEMPERATURE
The remote temperature information line is located next to the indoor
temperature line of the main unit’s display.
The wave icon is located above the OUT abbreviation indicates the reception
status from the remote sensor.
There are three following types of the reception status may be displayed:
The unit is in a searching
mode.
Temperature reading is
securely registered.
No signals detected.
- - -
NOTE: If the indoor or remote temperature goes above or below operating
range stated in specifications, the main unit’s display (weather) will show
dashes “- - -” on the corresponding line.
WEATHER FORECAST
This unit is capable of detecting the atmospheric pressure changes. Based on
collected weather data, it forecasts the weather for the next 12 to 24 hours.
