Mea SMAC 35DWG 22HP, Owner'S/Operator'S Manual

Page: 9 / 41

Document No 7209-D0002-01
9
SPECIFICATIONS
Compressor Type: Oil injected rotary screw compressor
Drive System: Diesel powered via direct mechanical coupling
Control: Pneumatic
Maximum Air Delivery 35 CFM @ 150 psi
Generator Supply
5.0 kVA 230V @ 50Hz
Max Welder Output 28.5V @ 220 Amp
Pressure Regulation: Mechanical inlet control valve modulates flow in response to demand
Inlet Valve Regulation Pneumatic
Engine Control System: Pneumatic speed control, engine and compressor high temperature and
pressure engine shutdown system
Safety Features 200 PSI relief valve in compressor sump
Temperature safety sensor in the compressor
Rapid blow-down valve to discharge system pressure on shutdown
Lubrication: All replacement compressor oils must be approved by MEA prior to use.
Warranty will be nullified if oil has not been approved.
MEA certified and approved synthetic compressor oil
Part Number 10019
– K0005
Quantity of Compressor Oil Required
– 4 Liters
Filters Paper-type replaceable air filters
Spin-on type compressor oil filter
Spin-on type Coalescing filter element