1. Safety precaution
2. Installation accessory
3. Installation method
4. Specification
5. Feature and function of the wired controller
6. Name on the LCD of the wired controller
7. Name of button on the wired controller
8. Preparatory operation
9. Operation
10. Timer functions
11. Weekly Timer 1
12. Weekly Timer 2
13. Fault alarm handing
14.Technical indication and requirement
15.Queries and settings
..........................................................1
................................................... 2
........................................................4
..................................................................9
................10
.....................11
.......................12
.................................................13
.....................................................................14
.........................................................20
..........................................................23
..........................................................29
...................................................36
.........................36
..................................................37
8
3. Installation method
6.Installation Diagram
Connect the wire from the master control board of the
indoor unit to a connecting cable. Then connect the other
side of the connecting cable to the remote control.
4-core wire
The connective wires group
Front grille
shielded wire
Fig. 3-8
NOTE:
Be sure to reserve a length of the connecting wire
for periodic maintenance.
There is a connection lug at the end of shielded wire,
the connection lug should be properly grounded.
Magnetic
ring
