time of recording. When this time is expired, to be able to
continue to use the remote management, you need to re-
new your subscription through the website
www.ither-
mo4all.eu
Windows
•
The "Update List" button allows you to update the list
of thermostats are connected to your network. Using
this function is performed a scan of the thermo were
present on the network. Each element of the list shows
the name of the thermostat and its IP address; in order to
with a specific sensor, just select the desired sensor.
•
To delete an item, select the sensor and press the "Canc"
button.
•
To change the name of the sensor select the sensor and
press "Enter", a window will appear where input the
new name, then click “OK".
•
The button "Register sensor" allows you to associate the
thermostat to your account on the website, the record is
only possible if the web function has been enabled and
the sensor has sent at least once its operating parame-
ters. Before using this function, turn on your web con-
nection in "Settings" tab and wait at least 15 minutes.
By activating this function, the active sensor is associ-
ated to your account previously created on the website
(see next chapter). If you have not already created an
account, you must first proceed to create your account
23
Summary of Contents for iThermo4All
Page 1: ...iThermo4All Programmable Thermostat User Manual...
Page 2: ......
