MDT AKI-0416.01, Manual

Page: 14 / 39

Technical Manual Switch Actuators AKI/AKS/AKK
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
14
4.3.2 Central function
The following illustration shows the setting options at the ETS ‐ Software:
Illustration 9: Central function
The following chart shows the dynamic range for this parameter:
ETS ‐ text Dynamic range
[default value]
comment
Central function

not active

active
switches the central function
on/off for this channel
Chart 9: Central function
The central function can be switched on/off for every channel. For switching on this function, you
have to choose the option “active”. By calling the central communication object, all channels with an
activated central function are switched on with their current parameterization. So switch ‐ on delays
or staircase functions are still kept.
The central function can make programming much more easier and your project can become more
clear.
The following chart shows the associated communication object:
Number Name Length Usage
Central function 1 Bit central switching of the channels
number depends to the number of channels
Chart 10: Communication object central function
4.3.3 Behavior at block/unblock
The following illustration shows the setting options at the ETS ‐ Software:
Illustration 10: Blocking function
The following chart shows the dynamic range for this parameter:
ETS ‐ text Dynamic range
[default value]
comment
Behavior when locked
Behavior when unlocked

On

Off

no change
Behavior to a
blocking/unblocking process
Chart 11: Behavior at block/unblock