Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
86
86
4.9.1 Switch
The following figure shows the available settings for the Switching function (here for the two-button
function):
Figure 44: Settings - Direct buttons: Switch
Identical Parameters
The following parameters are identical for all subfunctions of the "Switching" function:
ETS-Text
Dynamic range
[Default value]
Comment
Assignment of puch buttons
▪
On/Off
▪
Off/On
Setting only available for the
two-button function
.
Defines the sending behavior of
the left and right key
Subfunction
▪
Switch
▪
Toggle
▪
Send Status
▪
Send Status with off-delay
Setting only available for the
single button function
.
Defines the sub-function and
displays further parameters if
necessary
Table 79: Identical Parameters - Direct buttons: Switch
