F
EATURES AND BENEFITS
DC Offset Protection
This circuit protects the output of the amplifier against DC voltage. If for some reason DC
voltage is detected at the output stage, the amplifier will shut down protecting the
speakers from direct current.
Short Circuit Protection
The circuit protects the amplifier from damage due to a short found in the speakers or
wiring. If one of the speakers or its wiring comes in contact with ground, the amplifier will
shut down. To resume normal operation, correct the problem and turn the head unit off,
then back on. The amplifier will reset and play again.
Thermal Protection
To protect the amplifier circuitry against damage caused by prolonged exposure to high
temperatures, a thermal protection circuit is activated if the amplifier reaches excessively
high operating temperature. Once the thermal circuit is activated, the amplifier will shut
down to cool off. The amplifier will automatically turn back on once it cools down to a safe
operating temperature.
Power & Protection Indicator
The power L.E.D. Illuminates when the amplifier is on and receiving power. The protect
LED Illuminates when the amplifier has gone into the protection mode (Please refer to our
trouble shooting section).
Tri Mode Capable
If so desired, the amplifier may be run in stereo and mono at the same time. For example,
this feature would allow you to run a pair of mid and tweeters in stereo and a sub-woofer
mono.
Built-in Crossover
The MDS amplifiers include a built-in variable high and low pass crossovers. The low
pass crossover features a variable frequency selection (50Hz ~ 250Hz)and the high pass
crossover is fixed @ 80Hz.
Bass Boost
For added low frequency performance the C2 Is equipped with a variable 0 - 12dB
bass boost @ 45Hz . The C4 is equipped with a switchable 0, 6 or 12 dB bass boost @
45Hz.
Line Output (C2 Only)
One set of full range line outputs have been provided for convenient connection to
additional amplifiers in the system.
4
Summary of Contents for Mosfet C2
Page 2: ...1...
