MDM-1 „FOX”
FLIGHT MANUAL
7.7
Issue III
7.8
Air brake control system.
The glider is equipped with the plate air brake, extended on the upper wing surface.
Control system is of combined type.
From cockpit lever to fuselage torque tube - cables, further in the wings, the push rods are employed.
The air brake locking:
in retracted position - by the skip beyond "dead point"
in extended position - ensured by the stops installed on air brake plate.
7.9
Loading and baggage fixture - NOT APPLICABLE.
7.10 Water ballast system - NOT APPLICABLE.
7.11 Power-plant - NOT APPLICABLE.
7.12 Fuel system - NOT APPLICABLE.
7.13 Electrical system.
Fig. 7.4. Glider electrical system with electronic accelerometers installed
7.14 Miscellaneous equipment.
Descriptions of optional equipment (transceiver, board computer etc.) are contained in documents
related to these instruments, and in Section 9.
7
Rev. 7/ June 2019
Summary of Contents for MDM-1 FOX
