MDH VCBK2A, Instructions For Use Manual

Page: 12 / 36

12 VITEACARE.COM
MODEL: AMBONA
LANGUAGE: ENGLISH VERSION: 2020-11
• The walker has a braking system located on the rear wheels. The braking system is
the locking device. In order to stop the walker and immobilize it press down the lock
located on the rear wheels. To unlock the wheels, pull up the lock.
7. EVERYDAY USE AND MAINTENANCE
BRAKE SYSTEM
• Before each use of this product:
- Perform visual inspection of all structural components of the product,
- Check the operation of the braking system. Squeeze the brake
handles to see if the brake pads are fit properly to wheels and are able to stop
rollator.
- Carefully check the stability and condition of the support frame.
• Do not use the support in the event of any visible or perceptible damage (e.g. cracks
in the frame). It may cause an accident.
• Do not leave the stroller with the user close to open sources of fire.
• Be aware that the surface temperature of the upholstery and the frame parts may be
increased after exposure to the sun or other heat source. Furthermore, with low
temperatures there is a danger of overcooling metal parts of stroller. It may cause
burns or frostbite parts of the body.
• All repairs must be carried out by qualified personnel. And during the warranty period
only by the manufacturer’s service.
• Do not exceed the maximum height of the handles to push, rollator will lose stability.
• Before using, make sure that all screws are tight.
• Due to the possibility of jamming the fingers put extreme caution during assembly
rollator.
• In order to drive the rollator onto the threshold or curb should set the rollator
perpendicularly to the edge of the obstacle. Holding the handle, tilt the rollator in rear
raise the front wheels up.
• Then drive the rear wheels to the edge of the obstacle and holding the rollator handle,
lift slightly up and enter rollator on the obstacle.
OVERCOMING OBSTACLES (THRESHOLD, CURBS)