MDH 1018 LIMBER, User Manual

Page: 8 / 15

8
If the warning lights blink continuously up and down , the joystick was not is neutral position when
the power wheelchair was switched off. Turn off the power, release the joystick and again turn on
the power.
Joystick
The joystick controls the direction and speed of the power wheelchair. Moving the joystick from the
neutral position (centre) releases the electromagnetic brakes and allows to move the wheelchair. The
further you push the joystick, the faster the wheelchair moves. When you release the joystick it will
return to neutral position and the wheelchair will decelerate and stop. When you move the joystick
backward, the wheelchair will drive in reverse.
Mode button
Press the button to change driving mode into the adjustment mode which allows you to adjust the
backrest. If you move the joystick forward, the backrest will raise. If you move the joystick
backwards, the backrest will be lowered. When all adjustments are made, press the mode button
again to choose the driving mode.
Speed button
There are two speed adjustment buttons – if you want to slow down, press deceleration button. The
actual speed is shown on the indicator placed below the battery status bar. If you want to speed up,
press acceleration button.
WARNING! If you followed the user’s manual instructions but the warning lights are still
blinking, please, contact your dealer.
WARNING!
In case of unintended move of the wheelchair, you should release the joystick. If the joystick works
properly, the wheelchair should stop.
WARNING! When using the wheelchair for the first time, it is recommended to set the speed at
the slowest position.