MDG XT12E 2021 Owner'S Manual Download Page 31

Page: 31 / 92

www.marketdirect.com.au

Ph: 1300 494 494

Preparing for Bad Weather

During inclement weather the following should be done:
•

Close all roof vents and hatches to prevent water entering.

•

Protect the awning from high winds by retracting or securing with guy ropes and pegs.

•

Ensure your caravan is not parked in ground that will become boggy and prevent exiting the camp area

•

Close all external doors and hatches to prevent water ingress and wind damage

Packing Down Your Caravan
When packing down your caravan ensure the following:

•

All gas and electric appliances are turned off

•

Gas is turned off at the gas bottle

•

All loose items are secured and unable to move and damage themselves or the caravan

•

All cabinet doors are secured and locked along with all drawers closed

•

Roof is lowered, and over centre latches are locked with safety pin engaged

•

Site power lead is removed and stowed

•

Doorstep is raised and secured

•

All roof hatches lowered and secure

•

All windows closed and locked

•

Main door is closed and locked

•

All dust covers in place and secure

•

Secure Ensuite doors and close toilet

Summary of Contents for XT12E 2021




























































































Search results

Summary of Contents for XT12E 2021

Reviews:

Brands by name

Popular brands

MDG XT12E 2021, Owner'S Manual

Search results

Summary of Contents for XT12E 2021

Reviews:

Brands by name

Popular brands