MDC XT16-HR Family, User Manual And Manual

Page: 20 / 54

19
1300 4X4
Correct Use of Your Electric Brakes
Your trailer brakes are designed to work in synchronisation with your tow vehicle brakes. Never use your tow vehicle
or trailer brakes alone to stop the combined load. Your trailer and tow vehicle will seldom have the correct amperage
flow to the brake magnets to give you comfortable, safe braking unless you make proper brake system adjustments.
Changing trailer load and driving conditions, as well as uneven alternator and battery output, can mean unstable
current flow to your brake magnets. It is therefore imperative that you maintain and adjust your brakes as set forth in
the controller manual, use a properly modulated brake controller and perform the synchronisation/adjustment
procedure recommended by the brake controller supplier.
Important Safety Notice
Proven and in some cases approved service methods and correct repair procedures are
essential for the safe, reliable operation of the brakes, suspension and axles as well as the
personal safety of the individual doing the work. This manual intends to provide general
directions for performing service and repair work with tested, effective techniques. By
following these guidelines, it will help assure
reliability. The numerous variations in procedures, techniques, tools and parts for servicing
axles, as well as in the skill of the individual doing the work will determine outcomes. This
manual cannot possibly anticipate all such variations nor provide advice or cautions as to each. Accordingly, anyone
who departs from the instructions provided in this manual must first establish that they neither compromise their
personal safety nor the vehicle integrity by their choice of methods, tool’s or parts.
*If at all in doubt please refer all repairs and maintenance to a suitably qualified or experienced mechanical repairer.
*Market Direct Campers accepts no liability for personal injury, loss or damage resulting from incorrect applications,
methods and failure to perform maintenance safely and correctly.
Brake Adjustment
Brakes should be adjusted (1) after the first 300 km’s of operation when the brake shoes and drums have “seated,” (2)
at 5000 km’s intervals, (3) or as use and performance requires. The brakes should be adjusted in the following
manner:
Never crawl under your trailer unless it is resting on properly placed jack stands. Do not
place supports on any part of the suspension system and use the designated jack point or
under the spring base plate to jack trailer.
Brake Cleaning and Inspection
Your trailer brakes must be inspected and serviced at 5000km or more often as required by use and performance.
Magnets and shoes must be changed when they become worn or scored to avoid inefficient vehicle braking.
Brake Lubrication
This should only be done by qualified persons.
Caution
Do not get grease or oil on the brake linings, drums or magnets.