MDC XT14E 2021 Owner'S Manual Download Page 61

Page: 61 / 96

www.marketdirect.com.au

Ph: 1300 494 494

Problem

Possible Cause

Remedy

No Brakes

Open Circuits.

Find and correct.

Severe under adjustments.

Adjust brakes.

Faulty controller.

Test and correct/replace.

Short circuits.

Find and correct.

Weak Brakes

Great or oil on linings or magnets.

Clean or replace.

Corroded connection.

Clean or replace connectors.

Worn lining or magnets.

Replace.

Scored or grooved brake drums.

Machine or replace.

Poor Synchronisation.

Correct Controller setting.

Poor Brake adjustment.

Adjust Brakes.

Glazed brake Linings.

Re-burnish or replace linings.

Overloaded trailer.

Correct loading. Check at weighbridge.

Brakes Locking

Poor Synchronising with controller.

Adjust controller.

Poor Adjustment.

Adjust brakes as per instructions.

Faulty controller.

Test and rectify or replace.

Loose, bent or broken components.

Inspect and replace components.

Out-of-round brake drums.

Machine or replace.

Insufficient wheel load (dual Axle).

Correct trailer level to even load.

Intermittent Brakes

Faulty controller.

Test and Correct.

Broken Wires.

Repair or replace.

Loose connections.

Find and repair.

Faulty ground.

Find and repair.

Trouble Shooting

Brakes

Summary of Contents for XT14E 2021
































































































Search results

Summary of Contents for XT14E 2021

Reviews:

Related manuals for XT14E 2021

Brands by name

Popular brands

MDC XT14E 2021, Owner'S Manual

Search results

Summary of Contents for XT14E 2021

Reviews:

Related manuals for XT14E 2021

Brands by name

Popular brands