manualshive.com logo in svg

MDC XT14E 2021, Owner'S Manual

The MDC XT14E 2021 is an exceptional off-road camping trailer, designed to conquer any terrain. This versatile and rugged product provides ample space for adventure enthusiasts. To ensure you make the most of your XT14E, don't forget to grab your free Owner's Manual from our website, available for download at manualshive.com.

Share
Download
background image

www.marketdirect.com.au   

    

Ph: 1300 494 494

34

Solar Panels

Accumulated dirt and soiling can affect the performance of the solar panels. Panels should be cleaned as necessary 
to prevent this. Sealants around solar panel mounts should be checked annually to ensure they are in good condition.

Sealants

Roof sealants should be inspected every 6 months for condition. If the sealant has perished or adhesion has failed it 
should be repaired immediately.

Canopy Lifting Mechanism

The canopy lift mechanism requires maintenance as per the maintenance schedule.
Yellow arrows indicate light lubrication with lanolin based lubricant. (Every 6 months)
Red arrow indicates protecting the spring with a lanolin based lubricant. (Every 12 months)

Roof Skirt Elastic Cord

The elastic cord surrounding the PVC roof skirt is placed to ensure the skirt pulls inward when lowering the roof. 
This is an important function that protects the skirt from mechanical damage from the lifting mechanism and getting 
pinched by the roof. Regular inspection and replacement when necessary is part of the maintenance schedule. The 
illustrations below show the correct tension marked by a 

green V

 and incorrect shown by the 

red X

Summary of Contents for XT14E 2021

































































































Reviews:

No comments

Related manuals for XT14E 2021

Brands by name

Popular brands

Load more brands