MDC 15 Year Anniversary Edition XT 10E Owner'S Manual Download Page 39

Page: 39 / 108

www.marketdirect.com.au

Ph: 1300 494 494

Contents 39

Charging the Caravan

Mains Power

Your RV will charge from mains power via the Projecta 7 stage charger. Ensure the charger is plugged into its
dedicated outlet in its bay and is switched on. The factory battery in your RV is Lithium Iron Phosphate (LiFePO4)

Solar Power

The roof mounted solar panels will charge automatically provided there is enough radiated energy from the sun.

Motor Vehicle

Your towing vehicle should be fitted with an Anderson plug connection to charge your caravan while towing.

Preparing for Bad Weather

During inclement weather the following should be done:

•

Close all roof vents and hatches to prevent water entering.

•

Protect the awning from high winds by retracting or securing with guy ropes and pegs.

•

Ensure your caravan is not parked in ground that will become boggy and prevent exiting the camp area

•

Lower annex corner poles to create a pitch steep enough to allow all water on roof to run freely off the
canvas. Do not allow water to pool.

•

Close all external doors and hatches to prevent water ingress and wind damage

Packing Down Your Caravan

When packing down your caravan ensure the following:

•

All gas and electric appliances are turned off

•

Gas is turned off at the gas bottle

•

All loose items are secured and unable to move and damage themselves or the caravan

•

All cabinet doors are secured and locked along with all drawers closed

•

Site power lead is removed and stowed

•

Doorstep is raised and secured

•

All roof hatches lowered and secure

•

All windows closed and locked

•

Main door is closed and locked

•

All dust covers in place and secure

•

Secure Ensuite doors and close toilet

Summary of Contents for 15 Year Anniversary Edition XT 10E













































































































Search results

Summary of Contents for 15 Year Anniversary Edition XT 10E

Reviews:

Related manuals for 15 Year Anniversary Edition XT 10E

Brands by name

Popular brands

MDC 15 Year Anniversary Edition XT 10E, Owner'S Manual

Search results

Summary of Contents for 15 Year Anniversary Edition XT 10E

Reviews:

Related manuals for 15 Year Anniversary Edition XT 10E

Brands by name

Popular brands