background image

WARNING:

Failure to follow these warnings and 

the assembly instructions could result 

in serious injury or death.

READ ALL INSTRUCTIONS BEFORE ASSEMBLING 

CRIB. KEEP THE MANUAL FOR FUTURE USE.

WARNING:

Infants can suffocate on soft bedding. Never add a pillow or comforter. Never 

place additional padding under an infant.

• 

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed 

• 

on their backs to sleep, unless otherwise advised by your physician.

Strangulation Hazard: Strings can cause strangulation! Do not place items with 

• 

a string around a child’s neck, such as hood strings or pacifier cords. Do not 

place cords, straps,or similar items that could become wound around the child’s 

neck in or near this crib. Do not suspend strings over a crib or attach strings to 

toys.

To help prevent strangulation tighten all fasteners. A child can trap parts of the 

• 

body or clothing on loose fasteners.

DO NOT place a crib near a window where cords from blinds or drapes may 

• 

strangle a child. Do not place this crib near a window or a patio door where a 

child could reach the cord of a blind or curtain and be strangled.

Fall Hazard: When a child is able to pull to a standing position, set the mattress 

• 

to the lowest position and remove bumper pads, large toys and other objects 

that could serve as steps for climbing out.

• 

• Check this product for damaged hardware, loose joints, loose bolts or other

fasteners, missing parts or sharp edges before and after assembly and frequently 

during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if 

any parts are missing, damaged or broken. DO NOT substitute parts. Contact  

MDB FAMILY  

for replacement parts and instructional literature if needed. 

DO NOT use a water mattress with this crib.

• 

Parents should ensure a safe environment for the 

child by checking regularly, before placing the 

child in the product, that every component is 

properly and securely in place.

For cribs equipped with teething rails, replace teething rail if damaged, cracked 

• 

If refinishing, use a non-toxic finish specified for children’s products.

• 

Never use plastic shipping bags or other plastic films as mattress covers

• 

  because they can cause suffocation.

Infants can suffocate in gaps between crib sides when used with a mattress 

• 

  that is too small.

or loose. 

Please do NOT remove any wood screws 

in the normal disassembly of the crib. 

WARNING:

Do not use this crib if the child is able to climb out unaided or is taller than 

35 in. (89cm).

• Do not use this crib if you cannot exactly follow the accompanying instructions. • Follow warnings on all products in a crib.

• Ensure that the sides are properly latched or locked in 

place when the crib is occupied.

• The mattress used with this crib should not be more 

than 15cm thick and should be of such length with width 

that the gap between the mattress and the sides of the 

crib is no more than 3cm when the mattress is pushed 

into the corner of the crib.

page 8

Summary of Contents for Crib 4791













Reviews: