MD mXion RD6, User Manual

Page: 16 / 21

16
RD6
CV-Table
S = Default, L = Loco address, S = Switch address, LS = Loco and switch address usable
CV Description S L/S Range Note
1 Lokadresse 3 L 1 – 127 only if CV14 = 0
7 Software version – – read only (10 = 1.0)
7 Decoder reset functions
3 ranges available
11
16
33 basic settings (CV 1,11-13,17-19)
programming lock (CV 15/16)
function- & Switch outputs (CV 20-49)
8 Manufacturer ID 160 – read only
7+8 Register programming mode
Reg8 = CV-Address
Reg7 = CV-Value
CV 7/8 don’t changes his real va lue
CV 8 write first with cv-number, then CV 7
write with value or read
(e.g.: CV 49 should have 3)
➔
CV 8 = 49, CV 7 = 3 writing
9 SDF-House time min in minute 3 S 1 – 255 minimal time for reload rate
10 SDF- House time max in minute 15 S 1 – 255 maximum time for reload rate
12 Random generator 0 W 0 – 255 Add value to the CV for function
0 = deactive
+1 = A1, +2 = A2, +4 = A3, +8 = A4, +16 = A5,
+32 = A6
13 Automatic protocoll detection 0
LS
0/1 0 = automatic detection
1 = only DCC (recommended for multi-
protocol command stations)
14 Locomotive/switch control 1 LS 0/1 0 = locomotive control
1 = turnout control
15 Programming lock (key) 75 S 0 – 255 to lock only change this value
16 Programming lock (lock) 75 S 0 – 255 changes in CV 16 will change CV 15
17 SDF time for function 10 S 0 – 255 time base (10 ms / value)
18 Switch address calculation 0 S 0/1 0 = Switch adress like norm
1 = Switch adress like Roco, Fleischmann
19 Restore last position after restart
or voltage drop
0 LS 0 – 255 Add value to the CV for function
0 = deactive
+1 = A1, +2 = A2, +4 = A3, +8 = A4, +16 = A5,
+32 = A6