MD mXion RBM, User Manual

Page: 19 / 24

19
RBM
CV-Table
CV Beschreibung S L/W Bereich Bemerkung
1 XpressNet slave address 1 0 – 32 0 = disabled, 1-32 slave address
2 Bus 0 0 0 = XpressNet
3 debounce 20 0 – 255 100ms / value debounce time inputs
4 Radio band 0 0 0 = 2.4 Ghz
5 Radio channel 0 0 – 255 wireless channel
+128 = RBM as receiver (for LocoNet)
6 programming lock 160 0/160 0 = locked, 160 = open
7 software version – – only readable (10 = 1.0)
7 Decoder-Resetfunktionen
2 Reset ranges selectable 11
16 Module is completely reset
Programming lock (CV 6)
8 Manufacturer ID 160 – read only
7+8 Registerprogramiermodus
Reg8 = CV address
Reg7 = CV value
CV 7/8 retain their value
First describe the CV 8 with destination
address, then write or read CV 7 with value
(eg: CV 19 should have 3)
➔
CV 8 = 19, CV 7 = 3 send
9 Radio ID 165 0 – 255 Radio ID for feedback
10 K1 address high 0 1 - 2048 Switch address which is confirmed or
switched (depending on configuration)
11 K1 address low 1
12 K1 time delay 0 0 – 255 Message delay / delay switch
13 K1 inversion 0 0/1 0 = normale
+1 inverted switch INPUT
+2 inverted switch DIRECTION
14 K1 configuration 6 0 – 6 see Annex 1
15 K2 address high 0 1 - 2048 Switch address which is confirmed or
switched (depending on configuration)
16 K2 address deep 2
17 K2 time delay 0 0 – 255 Message delay / delay switch
18 K2 inversion 0 0/1 0 = normale
+1 inverted switch INPUT
+2 inverted switch DIRECTION
19 K2 configuration 6 0 – 6 see Annex 1
20 K3 address high 0 1 - 2048 Switch address which is confirmed or
switched (depending on configuration)
21 K3 address deep 3
22 K3 time delay 0 0 – 255 Message delay / delay switch
23 K3 inversion 0 0/1 0 = normale
+1 inverted switch INPUT