On this page you can see the software version of the LM-1, which sensor your LM-1 uses and
you can change the multiplier to calculate AFR from Lambda. A number of different multipliers
are already pre-selectable but you can change it to a custom one for the particular fuel you are
using.
9.3 Resetting the calibration data
Press the Reset Calibration button if you want to reset all calibration data in the LM-1.
This will clear all calibration data of the LM-1.
9.4 Updating the software
Click the 'Update Software' in the main page. Update software for the LM-1 has the extension dld.
You can download the latest LM-1 software from the
Mustang Dynamometer
web-site at
www.mustangdyne.com
If your computer crashes during a download, the LM-1 has a recovery mechanism where it will be
able to retry the download again and not be disabled by half loaded software. Switch the LM-1 off
and on again and then try to restart the LM1 Manager software. The recovery mechanism is
designed to be able to recover 99.9% of the time. While we don’t anticipate this occurring, it is
possible that the LM-1 will not recover correctly and may need to be serviced at our factory. If you
suspect this is the case, contact
Mustang
support.
- 11 -
