CSP-HE/HS-1
Optional Equipment
Cargo Hook Kit
ROTORCRAFT FLIGHT MANUAL
MD 500
(Models 369HE/HS/HM
)
Revision 6
9-5
FAA Approved
9-5. OPERATING INSTRUCTIONS: ROTORCRAFT CARGO HOOK KIT
PART I
GENERAL
The MDHI Cargo Hook Kit consists of a cargo hook which attaches to the fuse−
lage keel beam, electrical connections to provide the pilot with cargo release or
jettison capability using a switch on the cyclic stick, and a manual backup re−
lease mechanism. The cargo hook kit is designed to carry hook loads up to
1800 pounds.
When the kit is installed, an owner or operator holding a valid Rotorcraft Ex−
ternal Load Operator Certificate may utilize the helicopter for transportation of
external cargo when operated by a qualified pilot. OPERATIONS WITH CAR−
GO ON THE HOOK SHALL BE CONDUCTED IN ACCORDANCE WITH
APPLICABLE PORTIONS OF FEDERAL AVIATION REGULATIONS PART
133.
Information provided in these operating instructions is presented with the in−
tent of furnishing important data that can be used in the Rotorcraft Load
Combination Flight Manual. The Combination Flight Manual, which is re−
quired by FAR Part 133, will be prepared by the applicant to obtain the rotor−
craft External Load Operator Certificate.
