MCZ VIVO 90 COMFORT AIR 11 M1 Use And Installation Manual Download Page 6

Page: 6 / 68

17-FIRST APP START-UP AND ASSOCIATION WITH MCZ STOVES

IMPORTANT!! Do not lose or remove the QR code from the stove. If the stove is reset and/or the smartphone and/or

handheld remote control are changed, you must have the QR code and passwords available to configure the system.

AUTOMATIC MODE

The QR code and the passwords are located at the back of the stove and in the warranty.

Scan the QR code using the camera of the device (accessory or smartphone) and acquire it.

When the code is acknowledged, the app will ask you to enter an identification number for the stove (for example “living room stove”) to

easily identify the stove/s in the list of configured devices.

This will automatically configure the app to work with both home WI-FI and remote WI-FI technology.

VIVO 90

AIRMATIC

EXAMPLE OF QR AND PASSWORD LABEL

Summary of Contents for VIVO 90 COMFORT AIR 11 M1



































































Search results

Summary of Contents for VIVO 90 COMFORT AIR 11 M1

Reviews:

Related manuals for VIVO 90 COMFORT AIR 11 M1

Brands by name

Popular brands

MCZ VIVO 90 COMFORT AIR 11 M1, Use And Installation Manual

Search results

Summary of Contents for VIVO 90 COMFORT AIR 11 M1

Reviews:

Related manuals for VIVO 90 COMFORT AIR 11 M1

Brands by name

Popular brands