40
A
18 - MAINTENANCE AND CLEANING
CLEAN THE EXCHANGER AND THE COMPARTMENT BENEATH THE BRAZIER EVERY 2/3 DAYS
Cleaning the exchanger and the compartment beneath the brazier is a simple operation but very important if the boiler is to maintain
optimal performance.
We therefore recommend cleaning the internal exchanger every 2-3 days, performing these simple operations in sequence:
•
Activate the “PULIZIA” (CLEANING) function
– with the stove on press - menu (“E” key), select “IMPOSTAZIONI” (SETTINGS) using
the “C” and “D” keys and press OK (“E” key), scroll using the “C” and “D” keys and select “CICLO PULIZIA” (CLEANING CYCLE), confirm
pressing “OK” (“E” key), activate the “ATTIVA CICLO DI PULIZIA” (ACTIVATE CLEANING CYCLE) function, confirm by pressing OK (“E” key).
This procedure starts the smoke extractor on the maximum setting to expel the soot that becomes dislodged when the exchanger
is cleaned.
•
Clean the pipe unit
- Using the provided hook ”A”, shake the rods located beneath the top firmly for 5-6 times. This will remove any
soot that has deposited in the exchanger's smoke ducts during normal stove operation.
•
Deactivate the “CICLO PULIZIA” (CLEANING CYCLE) function
– this function is deactivated by pressing the “DISATTIVA CICLO
PULIZIA” (DEACTIVATE CLEANING CYCLE).
•
Clean the smoke conveyor compartment (fig. in following page) -
The stove is equipped with a removable ash tray “
G
”, which
collects any accumulations of soot and ash.
• Once cleaning is finished, reposition the top and the ash tray“
G
”.
If cleaning is not done every 2-3 days, the boiler could go into alarm caused by ash clogging after several hours of
operation.
B
E
TEMPERATURES
INFORMATION
PROGRAMS
SETTINGS
EXIT
OK
C
D
B
E
AUTOECO
EXIT
OK
C
D
FEED SCR LOAD
HYDRO-AIR
PELLET RECIPE
CLEANING
SETTINGS
