manualshive.com logo in svg

MCS mobilestor, Installation Manual, Page: 3 / 34

Share
Download
MCS mobilestor Installation Manual Download Page 3

MobileStor Installation Guide 

1

Introduction

Thank you for purchasing a new MCE hard drive upgrade solution for 

your PowerBook!  We’re sure that your new high-capacity hard drive 

will enrich your PowerBook computing experience.

 

Important Note:

  MCE strongly recommends that the instal-

lation of the new drive be performed by a qualified technician.  

The installation procedure involves disassembling the computer 

and exposing its sensitive electronics.  This is a delicate process 

and, if not performed properly, can cause damage to the com-

puter and the drive or injury to the installer.  These installation 

instructions are given for those who understand and accept 

these risks.  MCE will not be liable for any damage done to the 

computer, the person installing the drive, or to the drive itself as 

a result of an improper installation.

The new hard drive comes formatted and initialized with a Macintosh 

driver, but requires the installation of appropriate Mac OS operating 

system software for use in the PowerBook.  See the PowerBook User’s 

Manual for Mac OS operating system installation procedures

.

If any difficulty is encountered during the installation of the hard 

drive, you may receive free technical support by sending an email to 

[email protected].

Summary of Contents for mobilestor



































Reviews:

No comments