manualshive.com logo in svg

MCS mobilestor, Installation Manual, Page: 19 / 34

Share
Download
MCS mobilestor Installation Manual Download Page 19

PowerBook G4 Titanium 

17

Introduction to PowerBook G4 Installation

This chapter details the procedure for installing an MCE hard drive up-

grade kit into a PowerBook G4.

MCE strongly recommends that the installation be performed by a 

qualified technician.  The installation procedure involves disassembling 

the PowerBook and exposing its sensitive electronics.  This is a delicate 

process and, if not performed properly, could cause damage to the Pow-

erBook.  These installation instructions are given for those who under-

stand these risks.  If performed correctly, these instructions will guide an 

individual step-by-step through a successful installation of the new hard 

drive.

The new hard drive comes formatted and initialized with a Macintosh 

driver, but requires the installation of appropriate Mac OS operating 

system software for use in the PowerBook.  See the PowerBook User’s 

Manual for Mac OS operating system installation procedures

.

If any difficulty is encountered during the installation of the hard drive, 

you may receive technical assistance by calling (949)458-0800 within the 

United States or Canada, or by sending email to [email protected].

Summary of Contents for mobilestor



































Reviews:

No comments