IMM AGS-2
65
Number
Description
Controlled
Stop
Auto
Reset
51
Current Sensor Offset Error
--
N
52
Burden Switch Error
N
N
60
Thermistor Trip
N
N
61
Stack OT Switch Trip
N
N
71
Analog Input Trip
Y
Y
82
Modbus Time-out
Y
Y
94
CPU Error – Software Fault
N
N
95
CPU Error – Parameter Storage Fault
N
N
96
CPU Error – Illegal Instruction Trap
N
N
97
CPU Error – Software Watchdog Fault
N
N
98
CPU Error – Spurious Interrupt N
N
N
99
CPU Error – Program Storage Fault
N
N
Starter Planned Maintenance
During commissioning:
•
Torque all power connections during commissioning. This includes factory-wired
components.
•
Check all of the control wiring in the package for loose connections.
During the first month after the starter has been put in operation:
•
Re-torque all power connections every two weeks. This includes factory-wired
components.
•
Inspect cooling fans (if applicable) after two weeks for proper operation.
After the first month of operation:
•
Re-torque all power connections every year.
•
Clean any accumulated dust from the starter using a clean source of compressed air.
•
Inspect the cooling fans every three months for proper operation.
•
Clean or replace any air vent filters on the starter every three months.
NOTE:
If mechanical vibrations are present at the installation site, inspect the connections
more frequently.