www.mcohome.com
User Manual
MCOHome Technology Co., Ltd
4
Association Group
Device supports 2 association groups:
Group 1 is for “Notification” purpose, which can add up to 5 Node ID. Device works in
“Push”
mode in “Notification Command Class”.
Use “Configuration” can set the
threshold of CO2 Notification report.
When detected value is more than setting value, device will send (CO2 Detected Event)
report to the Group 1. And this report will keep sending in every 30 sec unless the detected
value lower than setting value.
Use “Notification Set” can set this unsolicited report, this function is default as “OFF”.
A gateway is suggested to associate with Group 2, which can support only one Node ID. The
gateway can ask for detected data any time. And the device will report to this associated
device (gateway) when detected data changes:
CO2: report when any change ≥50ppm
“Multilevel sensor Report(CO2=0x11)”
Temperature: report when any change≥ 0.5
℃
“Multilevel sensor Report(Temp=0x01)”
Humidity: report when any change≥ 2%
“Multilevel sensor Report(Humidity=0x05)’
Configuration Command Class
Command Class supported by the device:
COMMAND_CLASS_BASIC
COMMAND_CLASS_SENSOR_MULTILEVEL_V5
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_NOTIFICATION
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_VERSION
1-year Limited Warranty
MCOHome warrants this product to be free from defects in material and workmanship under
normal and proper use for one year from purchase date of the original purchaser. MCOHome will, at its
option, either repair or replace any part of its products that prove defective by reason of improper
workmanship or materials. THIS LIMITED WARRANTY DOES NOT COVER ANY DAMAGE TO
THIS PRODUCT THAT RESULTS FROM IMPROPER INSTALLATION, ACCIDENT, ABUSE,
Parameter No
Bytes
Value
Description
01
2
（
16Bit
）
1~2000ppm
CO2 Notification threshold
