www.mcohome.com User Manual
MCOHome Technology Co., Ltd 3
Scene Function:
As a Scene device, it supports “Scene Activation CC” and “Scene Actuator Conf CC” ,which
make the device can be added into any scene , and supports 255 Scene ID. In parameter item4, users
can configure which external switch will respond the scene CC .
Parameters Setting:
Add
Function
Byte
Options
Default
Remark
1
Switch state saved or
not when power
failure
1
0x00 not saved
，
switch will be off when
powered again
0x01 saved
，
switch will keep the same
state when powered again
0x01
2
RESERVED
3
LED Backlit
brightness level
1
0x00 LED disabled
0x01~0x0A Min level-Max level
0x0A
4
Scene respond
1
0x00 All switches respond Scene CC
0x01 only S1 respond
0x00
5
ALL ON/ALL OFF
1
0x00 forbid ALL ON, forbid ALL OFF
0x01 forbid ALL ON, allow ALL OFF
0x02 allow ALL ON, forbid ALL OFF
0xFF allow ALL ON, allow ALL OFF
0xFF
255
Factory setting
1
0x55 restore factory setting
write only
Restoring Factory Settings
Pls follow the EXCLUDING operation to restore the factory setting.
SAFETY NOTICE
1. Flush-mount only into a UL/ETL/CE certified plastic junction box and switch panel cover. The
minimum size should be 90*60*50mm, minimum Volume is 270cm
3
.
2. Use Copper Conductors Only.
3. CAUTION - Risk of Electric Shock - More than one disconnect switch may be required to
de-energize the equipment before servicing.
FCC Warning (Part 15.21) (USA only)
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
FCC Interference Statement (Part 15.105 (b)) (USA only)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
