McNeilus HD Rear Loader, Operator'S Manual

Page: 78 / 132

© 2008 McNeilus Truck and Manufacturing, Inc.
Rear Loader
64
4.2 Container Lock
The container lock option is used in combination with either
the container tipper option, the winch, or reeving cylinder
option, and is used to secure and guide the collection of
refuse from commercial collection containers in a manner that
is both safe and efficient. To properly secure a commercial
container:
Do not back up until you are sure the area
behind the vehicle is clear.
DANGER
1. With the lock lugs open and the Container Latch guide
bars lowered (Figure 28, Item 1), back up the truck or roll
the container into position. Make certain the pins on the
container sides are correctly positioned tightly against the
guide bars on the vehicle.
2. Raise the container latch guide bars into position on each
side of the container (Figure 28, Item 2).
3. Lower and lock the lugs onto the container latch guide
bars on each side of the container (Figure 28, Item 3).
Make certain that both of the container latch guide bars
are securely latched.
4. Use the container tipper, winch, or reeving cylinder to
empty the container into the hopper (Figure 28, Item 4).
Operation
NOTE
The front of the container will slide down
along the guide rails as the rear of the
container is raised.
5. To release the container, reverse Steps 1 through 4.
1 2
3
4
Figure 28