mcmurdo Smartfind M10, User Manual

Page: 53 / 86

53
4 GET STARTED
4.1 Start up the Transponder
The transponder will start up whenever the connected power source is ON.
It will operate automatically if the transponder has been properly configured
using the Configuration Software (MMSI entered) and GPS/VHF antennas
are also properly installed and connected to the unit. Normally the
transponder should transmit its own ships position every 30 seconds or 3
minutes depending on the vessel speed.
It should also receive other
vessels’ information that are in the vicinity.
The operational status of the transponder can be visually checked from the
LED lights on the unit. Description of the LED indicators are provided in the
following section.