INSTALLATION MANUAL OPERATION MANUAL
KANNAD 406 SURVIVAL
PAGE: 207
JUL 08/2013
• Fasten the hook and loop fastener strap tightly
• When installed on mounting bracket S1820511-05, secure the hook and
loop fastener strap by pressing the two snaps.
• Switch the ELT to the "ARM" position.
(4) Sealing
It is possible to seal the ELT on its bracket to prevent misuse.
In case of an emergency, this seal must be weak enough to be broken manually
without any special tool.
ELT shall be installed with locking pin so that switch cannot be put in the "ON"
position (see
Installation
).
• Install a seal using one of the two holes in the cover of the ELT and the
mounting bracket.
