INSTALLATION MANUAL OPERATION MANUAL
KANNAD 406 SURVIVAL
PAGE: 202
JUL 08/2013
this Programming Dongle and the "ELT" is switched to "ARM", it automatically
updates its own memory with the identification data contained in the
Programming Dongle memory.
When the ELT is removed from the aircraft, it keeps its identification data.
For maintenance purposes, it is possible to delete the identification information
of the ELT by connecting a "Maintenance Dongle" to the ELT. Any accidental
transmission with this "maintenance dongle" will not involve SAR operation as
the identification code transmitted is recognised by COSPAS-SARSAT as "not
on board".
When a maintenance dongle is connected:
• Country code is
227
(France).
• Protocol is
Test
.
• Identification number is
SI + 5 digits
(the last 5 digits of CSN number) or
K + 6 digits
(the 6 digits of the CSN number).
If the pin programming option is selected by the operator, the following
equipment are required:
• a "Programming Dongle" on each aircraft;
• a "Maintenance Dongle" on each ELT spare.
Figure 201: Maintenance Dongle
