mcmurdo G5, User Manual

Page: 14 / 33

14
Re-fitting into enclosure
1. Place the EPIRB on its side in the enclosure with the TEST button in view.
2. Engage base of EPIRB into the recess in the lever arm.
3. Bend the antenna and retain it in the recess.
4. Refit cover squarely, engaging the guides at the top end and the rod through hole
in cover.
5. Locate cover onto back plate and snap the lower end down over locating lug
6. Refit R-clip into groove at end of release rod. (Do not fit through hole)
CAUTION: Failure to fit EPIRB correctly may impair its ability to float free in an
emergency.
6
4
3
2
1
Cover correctly
snapped in place
5