welcome booklet
10
11
welcome booklet
Tips & Tricks
Using Your Citrus Juicer
Using your Citrus Juicer
Always remember to use fresh, washed fruit. Always ensure that nothing is
on the Screen or in the Citrus Juicer before operating.
Tips & Tricks
1.
Cut the citrus fruits in half.
2.
Exert slight pressure on the half of the citrus fruit when pushing
the cut surface down onto the Juicer Cone. Be sure not to put excessive
pressure on the Juicer Cone. The Cones will start turning and the juice
will begin to flow into the Juice Container. Once the juice reaches the 600
ml mark, empty the Juice Container. Never exceed the 600 ml mark.
Note: As soon as you stop pressing on the Juicer Cone, the Citrus Juicer
will stop.
3.
Unplug the Citrus Juicer before removing the Juice Container from the
Base.
4.
Turn the Juice Container counterclockwise and lift from the base. Pour
the juice out of the Juice Container. Make sure to clean the appliance after
each use as soon as possible so that the pulp does not dry and stick to the
surface.
•
You can influence the amount of pulp content in your juice by using the
Screen Opener. For a high pulp content, set the screen opener to the large
dot mark so that the openings in the screen are open wide.
•
In order to achieve the largest juice yield possible, the Juicer Cone will
change direction of rotation after several starts and stops.
•
If the Juicer Cone is not turning, check if there are fruit pips/seeds
between the Juicer Cone and the Screen and remove them.