The keypad panic may be initiated by holding both the ON and
the OFF keys depressed together for a period of 3 seconds. If
the alarm system is monitored a panic alarm report will be sent
to the monitoring station and, if enabled by the installer, the
sirens will sound.
Sirens enabled for Panic
YES
NO
Keypad duress must be enabled by the installer at installation.
The and is initiated by incrementing the last digit of a valid
user code by 1. For example, if the users code was 1234, then
a duress signal would be sent to the monitoring station if the
user entered 1235 as their code. In all other respects the panel
would react as if the normal code had been entered. For user
codes ending in 9 then a 0 would be entered eg. normal code is
1949, duress code would be 1940.
Keypad duress enabled
YES NO
page 9
Changing the Master Code
Notes:
1.
Master code default is 218572.
2.
Master code is 6 digits long.
3.
The Master code is only used to program the user codes. It cannot
change the status of the system. (Arm or disarm the panel)
4.
The system must be in OFF mode to enter the master code.
Key
Sequence
Operation
Enter
existing
Master
2
1
8 5
7 2
ON
code 218572 used to
enter
program
mode.
0
0
Select
function
00
2
4
6 8
1 2
ON
Enter new master
Code
e.g.
2
4
6
8
1
2
Off
Exit
program
mode
with
the
OFF
key.
Other Features
Keypad
Panic
Keypad
Duress
Summary of Contents for iRIS 8
Page 1: ......
Page 14: ...1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 24HR ENTRY EXIT PARTIAL Section List page 12 ...
Page 16: ......
