Amplified Mixers
Owners Manual
4
10. Mic Input (present on each input channel)
Standard female XLR connection accepts low impedance balanced microphone input.
11. Mic Input (present on each input channel)
Standard female 1/4" connection accepts high impedance unbalanced microphone input.
12. Channel Level Control (present on each input channel)
Adjusts the level of that input channel applied to the mix.
13. Effects Volume
Adjusts the overall level of the echo effects processor. Note that actual level of the processor is
independently controlled at each input channel.
14. Effects Echo
Controls echo "depth", or the actual "number" of echoes that occur.
15. Effects Delay
Controls the delay time between the echoes.
16. USB Input Level Control
Adjusts the level of the MP
3
and WMA file applied to the mix.
17. USB Input
Accepts standard USB style flash memory "thumb drives". This unit will read audio files saved in MP
3
and
WMA formats, regardless of bit rate.
Rear Panel Description
1. Tape Input
Dual RCA female inputs accept unbalanced line level signal from a CD player, tape player or similar
device. Separate Left/Right connections are provided for convenience when used with stereo equipment,
however channels are tied together internally. The front panel CD/Tape control (#6) adjusts the level of
this signal to the mix.
2. Tape Record Output
Dual RCA female outputs provide unbalanced line level signal to drive a record input on a tape player or
similar device. Separate Left/Right connections are provided for convenience when used with stereo
equipment, however channels are tied together internally. The signal from this output is unaffected by the
equalizer or master level control, but is affected by the relative level from each input channel and the MP
3
player.
3. Power Switch
Provides master power ON/OFF control for the mixer, amplifier and MP
3
player.
4. Power Cord Connection
Accepts standard detachable IEC power cord. This unit must be provided 115VAC, 60Hz.
