McLaren ARTURA, Owner'S Handbook Manual

Page: 24 / 326

Disabling the interior motion sensor
1. To disable the interior motion sensor,
switch off the ignition, open the driver’s
door and press the button on the rear edge
of the driver’s door. The light in the switch
will illuminate to indicate that the interior
motion sensor has been disabled.
NOTE: You cannot disable the interior
motion sensor if the ignition is switched
on.
2. Close the driver’s door and lock the vehicle.
The interior motion sensor remains disabled
until you unlock the vehicle.
Panic alarm
The panic alarm function is designed to attract
attention by sounding the horn and flashing the
direction indicator lamps repeatedly.
The panic alarm can be switched on by pressing
the hazard warning lamps button for a period of
3 seconds or more.
The horn will cease after the panic alarm has
been active for 60 seconds, but the direction
indicator lamps will continue to flash. The horn
can be re-initiated by pressing the hazard
warning lamps button for a period of 3 seconds
or more.
To switch the panic alarm off, press the hazard
warning lamps button briefly.
NOTE: The panic alarm will also sound
as warning to exit and stay clear of the
vehicle when a hybrid system fault
exists.
1.14
Before You Drive
Anti-Theft System
L