McIntosh XRT2.1K, Owner'S Manual

Page: 8 / 20

8
Assembling the Loudspeakers, con’t
Connect the Cable
Plug into the Socket
Rear Panel Midrange
and Tweeter Column
Cable Connection
Socket
Cable Connection
Socket
Metal Plate with Openings
for Midrange/Tweter
Connection Cables
Midrange/Tweter
Connection Cables
Figure 17
8. There are four Midrange/Tweeter Connection
Cables that need to be connected.
9. Two of the four cables are placed through open-
ings on each of the two Metal Plates used to
support the Midrange/Tweeter Column. Refer to
figure 17.
10. There are four Midrange/Tweeter Connection
Cable Sockets located on either side on the rear
panel of the Midrange/Tweeter Column just be-
low the Metal Plates.
11. Referring to the drawing in the upper part of
figure 17, connect the cable to the socket. Then
connect the other three remaining cables to the
three other sockets.
12. After the other XRT2.1K Loudspeaker has been
assembled and the cable connections have been
made, it is now time to attach the Loudspeaker
Grills that were previously removed after the
Loudspeakers were un-boxed.