McIntosh XRT2.1K, Owner'S Manual

Page: 6 / 20

6
Assembly of the Low Frequency and Lower
Frequency Midrange Column to the Upper Low
Frequency Column. Refer to figure 11.
1. Locate the supplied hardware fasteners and tools
from the Accessory Box previously un-boxed.
2. Carefully align the bottom of the Upper Section
Low Frequency Column with the Low Frequency
Midrange and Low Frequency Lower Section
Column. Make sure that the end of the Connec-
tion Cable Plug with its cable will continue to
fit through the Cable Opening on the Top Metal
Plate. Refer to figure 12.
3. Plug the Connection Cable Plug from the Lower
Section Column into the Connection Cable Socket
located on the bottom Upper Section Column.
Then rotate the Connection Cable Plug End 45
Degrees Clockwise to lock it into place.
Note: In the future, if it should become necessary to
disconnect the cable, press the metal tab lever
on the connector, rotate the connection cable
connector 45 Degrees Counterclockwise and
then pull the cable connector downwards.
4. Carefully align the bottom of the Upper Section
Low Frequency Column with the Low Frequency
Midrange and Low Frequency Lower Section
Column. Make sure the openings on the Metal
Plate for the Hex Head Bolts line up with the Bolt
Openings on the Bottom of the Upper Section
Low Frequency Column. Refer to figure 13.
5. Using the supplied Allen Wrench, fasten the Hex
Head Bolts with the Lock Washers to secure
the Upper Section and Lower Section Columns
together.
Assembling the Loudspeakers
Foam
End
Cap
Connection
Cable
Upper Section
Low Frequency
Column
Lower Section
Low Frequency
Midrange and
Low Frequency
Column
Connection
Socket
Top
Metal
Plate
Cable Opening
Figure 12
Figure 11
Upper Section
Low Frequency
Column Containing
Woofer Drivers
Part of the Lower
Section Column
containing the
Lower Frequency
Midrange Drivers
Part of the Lower
Section Column
containing the
Woofer Drivers
Figure 13
Lock Washer
Hex Head Bolt
Lock Washer
Hex Head Bolt