background image

20

2. To cancel the previously selected Repeat Mode, 

press the REPEAT Push-button until the character 

“1” and/or the symbol “

N

” in the Front Panel Infor-

mation Display is extinguished.

Random Playback

This feature allows for listening to Tracks of a Disc in 

a Random Order. Refer to figure 24.

Note: Before the Random Playback Mode feature on 

the MCT500 can be activated, the disc must be 

stopped or the message “Press 

<

 (stop) first” 

will momentarily appear on the Front Panel Dis-

play. Refer to figure 25.

1. With the MCT500 in the STOP

<

 Mode press 

the SHIFT Push-button and then the RANDOM 

Stop Mode

Press the STOP

<

 Push-button at any time to stop 

Playback. To listen to the disc again, press the PLAY/

PAUSE

„

/

;

 Push-button and playback will start from 

the beginning of the disc.

Direct Track Selection

The MCT500 Front Panel Display indicates the Disc 

Track currently playing. Use the Remote Control 

NUMERIC Push-button(s) to enter the desired Track 

Number. Refer to pages 14 and 15 for additional infor-

mation using the Remote Control.

Repeat

This allows repeating a Track, Disc, Program Mode 

or Random Play Mode on a continuous basis. Refer to 

figures 2 and 24.

1. With the disc playing (Regular, Program or Ran-

dom Playback Modes), press the SHIFT Push-but-

ton then the REPEAT Push-button once to activate 

the Track Repeat (

N

1); press the REPEAT Push-

button twice to activate the Disc Repeat (

N

). Refer 

to figures 22 and 23.

How to Operate the MCT500, con’t

Push-button. The word RANDom will be indi-

cated in the Front Panel Display. 

Refer to figure 26.

2. Press the PLAY/PAUSE

„

/

;

 

Push-button to start Random 

Playback. After all the tracks have 

been played the MCT500 will 

stop.

Notes: 1. To provide continuous 

playback of the disc, press 

the REPEAT Push-button 

twice to activate the Disc 

Repeat (

N

) after the Ran-

dom Playback Mode has 

started. If Repeat (

N

1) is 

selected, the current track 

will repeat.

2. The NEXT TRACK 

:

 

function will advance to 

the next random selection 

and start playing.

3. To cancel the Random Playback 

Mode, press the STOP

<

 Push-

button, then press the RANDOM 

Push-button twice.

Program Playback

This feature allows for playback of 

selected Tracks on a Disc in the de-

sired order. In the following example, 

a Disc is programmed to play Track 6 

followed by Track 4 and then Track 2.

Figure 22

  1             0 m 0 5 s

Figure 23

  1             0 m 0 5 s

P r e s s           f i r s t

Figure 25

Figure 24

Figure 2

Summary of Contents for MCT500





























Reviews: