11
Back and Next
Press BACK or NEXT pushbuttons to jump from the be-
ginning of one track to another. This operation can be per-
formed in either Stop or Play Mode. If a track is playing,
pressing BACK once, and play will restart at the beginning
of the track that is playing. Pressing BACK twice will
move back to the start of the previous track and start play-
ing.
Note: BACK and NEXT can be performed when the disc is
playing, or in the Stop Mode.
Repeat Functions
The repeat function allows repeat play of an entire disc, a
single track, a preselected track, a disc with deleted tracks
or a portion of a disc determined by a start and stop point.
Note: Press the REPEAT pushbutton to activate Repeat
function in Delete Play, Single Track Play and
Preselected Track Play Modes.
Repeat an entire disc
1. Press the REPEAT pushbutton. Refer to Figure 9.
2. Press the PLAY
pushbutton. The
entire disc will
play to the end,
start over and
continue playing repeatedly.
Note: The Repeat Mode can be engaged at any time during the
playing of a disc.
3. Cancel the entire disc Repeat Play Mode by pressing
the REPEAT pushbutton a second time.
Repeat play between two points
1. Load a disc and start it playing.
2. When the point on the disc that you wish to start Re-
peat Play is reached, (Point A), press the A-B
pushbutton. This sets the beginning of the disc segment
you wish to play repeatedly. The disc will continue to
play. Refer to
figure 10.
3. When the point
on the disc is
reached where you want Repeat Play to end, (Point B),
press the A-B pushbutton a second time. This sets the
ending of the disc segment you wish to play repeatedly.
This disc segment will now start to play repeatedly.
How to Operate the MCD751,
cont
How to Operate the MCD751, cont
4. Cancel A-B play mode by pressing A-B again or
pressing Stop.
Time Display
1. When the Disc is loaded and the tray closes, the total
number of tracks and total disc time are displayed for
a few seconds. Refer to Figure 11.
Note: When the
player is in
Stop Mode,
press the
TIME
pushbutton once to display for a few seconds the total
number of tracks and total disc time.
2. When disc play starts, the elapsed time of each track
is indicated.
3. Press the Remote Control TIME pushbutton once and
the remaining
track time is
displayed. Re-
fer to Figure
12.
4. Press the Remote Control TIME pushbutton a second
time and the
total remaining
time on the
disc is dis-
played. Refer
to Figure 13.
Reset of Microprocessors
In the event that the MCD751 stops functioning, turn the
POWER SWITCH OFF for approximately 10 Seconds.
This will reset the transport microprocessors. Refer to fig-
ure 7.
Figure 10
Figure 13
Figure 9
Figure 11
Figure 12
