McIntosh MCD751, Owner'S Manual

Page: 10 / 16

10
How to Operate the MCD751,
con’t
4. If you wish to change a selection, press the CLEAR
pushbutton and then the number for the new track se-
lection.
5. Press the REVIEW pushbutton to review the details of
each track selected for playback.
6. Press the PLAY pushbutton and each of the tracks will
play in the order you selected.
Note: Track selection is performed when the player is in Stop
Mode. The track selection memory will be retained
when all tracks have played or when the STOP
pushbutton is pressed. To cancel the track selection
memory, press the STOP pushbutton twice, press the
PGM pushbutton or open and close the disc tray.
Delete Play
You can delete any tracks on a disc that you do not wish to
listen to.
1. Load a disc into the tray.
2. Press the DELETE pushbutton. Refer to Figure 6.
3. Press the
NUMBER
pushbutton (s)
on the Remote
to select the
tracks you wish to delete.
4. If you wish to change a selection, press the CLEAR
pushbutton and then the number for the new track se-
lection to delete.
5. Press the REVIEW pushbutton to view the details of
each track selected to delete.
6. Press the PLAY pushbutton and all the tracks except
the ones deleted will play.
7. Cancel the Delete function by pressing the DELETE
pushbutton a second time, pressing the STOP
pushbutton or open and then close the disc tray.
Pause Mode
1. Press the PAUSE pushbutton to temporarily stop play
operation at any time. The Red LED above the PAUSE
pushbutton will light. Refer to Figure 7.
2. Press the PAUSE pushbutton a second time to resume
playing the disc.
Stop Mode
Press the STOP pushbutton at any time to stop disc play.
Index Search Mode
The INDEX pushbuttons allow direct access to any index
point encoded in a disc track.
1. Press either a LEFT(lower number) or RIGHT(higher
number) INDEX pushbutton to select a desired Index
Number in a
specific disc
track. Refer to
Figure 8.
2. The disc will
automatically start playing from the selected Index
Point.
Note: The Index Numbers appear to the right of the Track
Numbers in the Display Panel. Not all discs will have
Index Numbers.
Reverse or Fast Forward
Press REV or FF pushbuttons to move rapidly through all
tracks on a disc. Speeded up sound will be audible during
this operation.
How to Operate the MCD751, con’t
Figure 7
Figure 8
Figure 6